Trianglelab Swiss CR10 hotend Precision aluminum radiator Titanium BREAK 3D print J-head Hotend for ender3 cr10 etc.

$83.13$236.04

SKU: 2251832845594188 Category:

Description

  • Brand Name: Trianglelab
  • Origin: Mainland China
  • Item Type: Hotend Kit
  • Model Number: Swiss CR10 hotend
If you need to send UPS/Fedex/TNT/DHL, please contact us. We need to discuss the freight with you.
The trianglelab has always been concerned about product quality. We are developing products and working hard to improve the quality. We will not abandon our reputation because of many cheap products on the market. It is believed that only high quality products can ensure the quality of your work and bring safety to your work.
Some of our products may be more expensive than others, but please believe in our quality and believe that you will not regret when you receive the goods.

***-***

***-***

Trianglelab Swiss CR10 hotend 
This product only supports 1.75mm filament!!!
 
Compatible:                                   
Compatible with CR-10S
Compatible with CR-10S -S5
Compatible with CR-10S -S4
Compatible with CR-10
Compatible with CR-10 -MINI
Compatible with CR-20
Compatible with CR-20 PRO
Compatible with Ender2
Compatible with Ender3
Compatible with Ender3 PRO
Compatible with TronXY X5S
Compatible with Tevo Tornado
Compatible with Alfawise U20
*13:100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " &"Hotend "All In ONE"
#define TEMP_SENSOR_0 13
https://github.com/MarlinFirmware/Marlin/blob/1.1.x/Marlin/thermistortable_13.h
 
Recommended slicer setting:
retraction speed over 80MM/S
retraction length 2.5-4MM
 
If you are facing PLA clogging problem, please try the followings:
1. Increase the retraction speed. The speed may have being limited in the firmware try to change it. G-command "M203 E200"
2. Increase the extruder  acceleration. Check your firmware settings. G-command "M201 E9000"
3. Reduce the retraction length. It depends on your machine setup.
4. Increase the nozzle temperature by 5-10 degrees.
5. Do not install the 2 screws for support the heatblcok like the stock hotend on the CR-10 printer.
6. Make sure that there is no gap between the heatsink and the heat breaker.
CR-10 HeatSink                                             X 1
CR-10 Titanium alloy heat break                      X 1
CR-10 Heater Block                                        X 1(Silicone Socks Gift)
*Compatible 100K B3950 Thermistor OR 104GT-2 Thermistor  
*0.4MM Nozzle (We offer 3 types of options)    X 1
The following is the full version of the option, please pay attention to choose the correct voltage.
Thermistor (NTC 100K B3950)                        X 1
Heater Cartridge(12v or 24v)                          X 1
*We do not recommend installing the locking screw for the BLOCK. The screw will cause more heat to be transferred to the CR10 HeatSink, potentially affecting your cooling system.
*Please read the following list of explanations for each package carefully.
SET Brass nozzle kit:
·CR-10 HeatSink X 1
·CR-10 Titanium alloy heat break X 1
·CR-10 Heater Block X 1
·0.4MM MK8 Brass Nozzle X 1
 
SET Hardened Steel kit:
·CR-10 HeatSink  X 1
·CR-10 Titanium alloy heat break X 1
·CR-10 Heater Block X 1
·0.4MM MK8 Hardened Steel Nozzle X 1
 
SET Ruby Nozzle kit:
·CR-10 HeatSink  X 1
·CR-10 Titanium alloy heat break X 1
·CR-10 Heater Block X 1
·0.4MM MK8 Ruby Nozzle X 1
 
SET 12V Brass Hotend:
·CR-10 HeatSink X 1
·CR-10 Titanium alloy heat break X 1
·CR-10 Heater BlockX 1
·0.4MM MK8 Brass Nozzle X 1
·Thermistor(NTC 100K B3950) X 1
·Heater Cartridge 12V X 1
 
SET 24V Brass Hotend:
·CR-10 HeatSink X 1
·CR-10 Titanium alloy heat break X 1
·CR-10 Heater BlockX 1
·0.4MM MK8 Brass Nozzle X 1
·Thermistor(NTC 100K B3950) X 1
·Heater Cartridge 24V X 1
 
SET 12V Hardened Steel Hotend:
·CR-10 HeatSink X 1
·CR-10 Titanium alloy heat break X 1
·CR-10 Heater BlockX 1
·0.4MM MK8 Hardened Steel Nozzle X 1
·Thermistor(NTC 100K B3950) X 1
·Heater Cartridge 12V X 1
 
SET 24V Hardened Steel Hotend:
·CR-10 HeatSink X 1
·CR-10 Titanium alloy heat break X 1
·CR-10 Heater BlockX 1
·0.4MM MK8 Hardened Steel Nozzle X 1
·Thermistor  (NTC 100K B3950) X 1
·Heater Cartridge 24V X 1
 
SET 12V Ruby Hotend:
·CR-10 HeatSink X 1
·CR-10 Titanium alloy heat break X 1
·CR-10 Heater BlockX 1
·0.4MM MK8 Ruby Nozzle X 1
·Thermistor(NTC 100K B3950) X 1
·Heater Cartridge 12V X 1
 
SET 24V Ruby Hotend:
·CR-10 HeatSink X 1
·CR-10 Titanium alloy heat break X 1
·CR-10 Heater BlockX 1
·0.4MM MK8 Ruby Nozzle X 1
·Thermistor(NTC 100K B3950) X 1
·Heater Cartridge 24V X 1
CR-10 Hotend(Hardened Steel Nozzle)
CR-10 Hotend(Brass Nozzle)CR-10 Hotend(Ruby Nozzle)
CR-10 Hotend Kit(Brass Nozzle)
CR-10 Hotend Kit(Hardened Steel Nozzle)
CR-10 Hotend Kit(Ruby Nozzle)

Reviews

There are no reviews yet.

Be the first to review “Trianglelab Swiss CR10 hotend Precision aluminum radiator Titanium BREAK 3D print J-head Hotend for ender3 cr10 etc.”

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

0