Are you looking for that perfect gift for each person in your family, but not sure what to give them? Well they always say something that you make is more special than something you have bought! Consider looking at this awesome list of 3D printable Christmas Gifts, and picking something for those people! We are…
Hello all of you 3D Printers out there! It’s time to take a look at the Top 5 Most 3D Printed models of September 2020. With the onset of coronavirus lockdowns, we have seen a tremendous increase in the amount of 3D printed models. Our posts will show what’s been most popular, and maybe inspire…
Recently the team over at 3DUpfitters.com sent us an Ender 5 enclosure for review. We told them we would conduct an honest review and take lots of pictures for an instructional how-to. Initially I was quite excited to get my hands on this thing. It seemed like a well-thought-out execution of an acrylic printer enclosure.…
Happy New Years everyone! I hope you are sticking to your resolutions, while 3D Printing all sorts of neat new gadgets and useful items. This month I want to ask all readers to please like us on Facebook and begin to share your 3D Prints with us; we will certainly begin to improve our Facebook…
Hello everyone! It’s time again to do a TOP 5 Most Popular 3D prints, since Thingiverse has started to speed up a little it seems to be changing the top “Popular” files more often. It’s time to announce the top 5 most popular prints of November, as we will always remember in history which prints were hot as the future unfolds!
#1 Bottle Opener Cap Gun by 3Deddy
30% for most parts, print the trigger solid!
Filament: REAL PLA
PETG is too flexible I think so use PLA. Print the trigger SOLID!
Print it strong so it will not break while opening bottles.
#2 A Frame Bird House by APC514
#3 Flying Sea Turtle by amaochan
1.Layer height 0.2mm
2.Low down the flow to 90%or 95%.
4.Add oil on moveable parts.
5.Replace old parts with new parts which is added “-NEW” after the original part name.
6.Part “FT-GEAR02” is advised to print in layer height 0.1mm or 0.15mm,and it needs support.
#4 Mechanical Quick Grab/Release Phone Stand by Arron_mollet22
Visit the thingiverse URL for how-to install the pieces of print: https://www.thingiverse.com/thing:3681512
#5 Cute Mini Octopus by McGybeer
This is a 3D print that has been on our Top 5 multiple times, and it may continue to be!
Linear Advance on an Ender 3 is something that you don’t hear about too often. It’s been noted on quite a few websites, including marlin’s own wiki that the bowden setup may not benefit from a linear advance. I was looking into ways to print faster while still maintaining the print quality of my slower…
Below we are sharing the top 10 most popular 3D Print STL files of June 2019. Not only does this spread awareness to people potentially thinking about purchasing a 3D Printer, it also archives these popular files to keep them safe. If Thingiverse goes down, we will have them archived for safe keeping. Hit the…
One of the first things I wanted to make when I began my adventure into 3D printing was some organizers for my toolbox(es). I had seen on YouTube videos other guys designs and was amazed by the organization and cleanliness of their toolbox drawers. I have multiple tool chests that I would have to organize,…
A new network of 3D-printed gun advocates is growing in America – and this time things are different. Unlike previous attempts to popularise 3D-printed guns, this operation is entirely decentralised. There’s no headquarters, no trademarks, and no real leader. The people behind it reckon that this means they can’t be stopped by governments. “If they…
We tested this profile for some mini figurines based on Reddit referrals. It’s a slow and high detail for anything small that needs super fine details. I would recommend it to anyone printing out minis. If you are an avid 3D printer you would definitely want to give this profile a try! A+ Profile! Author:…