Today we are reviewing the awesome new combo all-in-one package from Dyze 3D Printing. We ordered a DyzeXtruder Pro and Dyzend Pro with the 500* thermocouple and 24V heater. All of our systems were 24v, and the kit come with everything needed minus the mounts to install this kit. I was quite impressed with the […]
Upgrade your 3D Printer with TriangleLab’s new CHC Hot-End. We were sent the CHC upgrade kit which is installed on your V6 style hot-end to upgrade it. The CHC Hot-End is a ceramic style heater, in a cylindrical shape. It’s compatible with many of the V6 style hot-ends: V5/V6 Hot-end CR10 Hot-end Hemera Hot-end Matrix
Which 3D Printer should I purchase? It’s a common question that I get via e-mail, and I figured I would make a little guide about it. This isn’t a be-all end-all guide to the purchase of 3D printers. It’s mainly an opinionated guide, where I suggest printers based on budget, requirements and experience level. We
Sorry to the community but Mediaman wrote a DMCA Takedown request for this information, therefore we must remove his OPEN SOURCE system from our website to avoid conflicts. Please check out the EVA system, which is the most advanced system available and the one we now recommend. The DMCA takedown includes the paperwork required to
We are getting tons of questions about upgrading the filament feed tube, and whether it’s really worth it to pay for the expensive Capricorn tubing. I always ask the same questions, like are you planning to run filament other than PLA in the future? Also are you having any issues with retraction and extruder grinding?