Today we are reviewing the all-new Rapido Hot-End that comes with a PT1000 already installed. Making it so much easier to get into the higher temperature ranges, without modifying the ceramic heaters. We have opted to order one of these Rapido and install it onto our RatRig V-Core 3 CoreXY Printer for testing! We ordered […]
Today we are reviewing the awesome new combo all-in-one package from Dyze 3D Printing. We ordered a DyzeXtruder Pro and Dyzend Pro with the 500* thermocouple and 24V heater. All of our systems were 24v, and the kit come with everything needed minus the mounts to install this kit. I was quite impressed with the
Upgrade your 3D Printer with TriangleLab’s new CHC Hot-End. We were sent the CHC upgrade kit which is installed on your V6 style hot-end to upgrade it. The CHC Hot-End is a ceramic style heater, in a cylindrical shape. It’s compatible with many of the V6 style hot-ends: V5/V6 Hot-end CR10 Hot-end Hemera Hot-end Matrix
In this post I will write about my adventure upgrading my uncle’s CubeX Duo to the latest version of marlin. They had already installed a Makerbase V1.1 board prior to eliminate the need for the CubeX cartridges, but the nozzle had been cleaned in their shop with something much larger than 0.4 and print quality
GUIDE: Upgrade and Modify the CubeX Duo to use V6 Style Hot-end Read More »
Hello everyone, today we are going to be further upgrading our E3D clone hot-end by TH3D namely the TH3D Tough. We have been using this hot-end for several months since our initial “Top 5 Mods for Ender 5” article, and it has done well. I have experienced quite a few jams though. Every time I
Eliminate E3D and E3D Clone Hot-End Jamming with this Titanium Heat Break Read More »
